Standard Controls includes Pendant, Radio Pushbutton, Transmitter, Receiver, Radio Joystick, Option Available (Mode Dependent), Cab Controlled and Double Joystick with 5-Speed. And we also provides F24-60 series is particular suitable for control of tower cranes, overhead cranes and concrete pumps.
AUTOMATION
Standard Controls
- Conforming to Standards : IEC 947-5-1, EN 60 947-5-1, IEC 337-1, VDE 0660-200
- Impact-resistance double insulated polypropylene, coloured yellow throughout
- Approved to UL listed A600-Q600 & CSA A600-Q600
- IP 65 ( to IEC 529) protection against ingress of dust and water
- Double insulation to class 11 IEC 536
- Ambient air temperature range -25?C to + 75?C
- Humidity depending on ambient temperature up to 95% RH
- Mechanical durability of 1 million operations
- Light weight
- Dual or single pressure push-buttons
- Positive feel switching
- Mechanical interlocks on opposite motions
- Shrouded rubber sleeve with stepped entry diameter for cable ?8… ?26 mm
- Rated insulation voltage 600V conforming IEC 947-1
- Slow break contact operation model
- Mushroom head emergency stop push-button with positive operation to IEC 947-1
- Terminal identification by numbers to CENELEC EN 50013
- Short circuit protection 10A or less
- Operating rate up to 3600 operations/hour at 5A ( well in excess of crane duty)
- Approved by VDE, SEV, ASE, DEMCO, SEMCO and others
- Easy to operate ergonomic design with recessed push-button position ( helps prevent inadvertent operation)
- Enclosure IP65
- Robust glass fibre reinforced plastic casing
- Phase Lock Loop ( PLL)
- Both power source and output relays with fuses
- Synchronous transmission encoding and decoding
- Changing frequency manual/auto
- Auto signal searching
- No. of functions and parameters setting > 57
- No. self diagnostics > 28
- No. of alarms > 28
- Frequency renage 415 ~ 483 MHz
- Operating temperature -30?C ~ 75?C
- Relays 10A/250V
- ID Code : 32 Bit
- Hamming Code =4
- Response time = 65ms
- Static > 15kV
- Surge > 4kV
- Field Strength > 10V/m
- Compact design
- 3 stage power indicator
- Buzzer / Alarm
- Removable key ( waterproof)
- Changeable pushbutton symbols
- Shock resistant design
- Password power on 4 digits
- Output power = 10mW
- Normal power consumption approx. 40mA
- Harmonic = 65dB
- Modulation = 2.5kHz
- Alarm and signal light output
- Power source detector
- Anti power interrupt circuit
- Relay’s contacts detector circuit
- Shock resistant
- Dual antenna against multi-path reflection
- Enhanced watch dog circuit
- 3 superheterodyne
- Frequency deviation tracing circuit
- Sensitivity = 110dBm
- Adjacent channel restrain > 80dB
- 4, 8 10 or 12 keys. 16 control commands plus 2 emergency stop buttons and power unit safety system.
- IP 55 ( NEMA 4) Optional IP65
- 1 or 2 stage pushbutton
- Emergency stops for immediate standstill
- Catch release
- Linear levels
- Optional display on selected models
- Customised transmitters
- Tandem operations
- Rotary switch
- 3 year warranty on electrical components
- Designed with roll bar combining non-tiring operation with safety requirements
- Optional code plug facility
- Rubber protective kit
- Optional infrared start up. Crane radio control may only be
activated if there is ?visual contact? between transmitter and receiver. This prevents unattended use of the crane - Time delayed outputs
- Programmable outputs
- Output checking
- Transmitter tilt switch
- Explosion protected transmitter
- Auto Power Off
- Frequency synthesizer
- UHF radio modules with customer selectable frequency
- Tandem operation
- Handover facilities
- Frequency scanning
- Safety interlocking via code pugs
- Data feedback to transmitter
- Programmable joystick output curves ( analogue systems)
- Open cab or fully glazed with toughened glass
- Fixed or opening windows
- Fixed to structure or traversing with crab unit
- Power Sockets
- Fully adjustable seating
- Air Conditioning
- Heater
- Internal Lighting
- Load Displays
- Choice of joystick or radio controls
- Emergency escape harness
Joystick
Double Joystick with 5-Speed
- F24-60 series is particular suitable for control of Tower Cranes, Overhead Cranes and Concrete pumps. This particular model is equipped with most sophisticate safety features for making the entire operation safe.
- Fully programmable relay configuration with maximum 16 relays output per command.(No extra extension unit required).
- Durable nylon-fiber housing for extra shock resistance.
- Operating range up to 100 meters.
- Pre-wiring standard cable making wiring procedures easier.
- New waist belt provide maximum comfort for operator(Optional)
- 3 stages LED battery power indicator.
- Acceleration delay time control(Providing smooth moving for multiple speeds cranes)
- Safety features:4.3 billion unique ID code/Hamming code/Enhanced watch-dog circuit.
F24-60 Transmitter
- Double Joystick
- 6 Single Step Buttons(Including start button)
- 1 Emergency button(EMS),
- 1 Rotary Key Switch.
- 4 Selector Switches
F24-60 Receiver
- Max. 40 relay output (Programmable)
- NC/NO relay (Optional)
- External passive antenna (Optional)
- Operating Temp:-35?C ~ +80?C
- Operating Range:100M
- Transmitter power supply: 4 AA size Alkaline / Rechargeable Battery
- Receiver power supply: AC 48/110/220/380V
- Protection class: IP 65 Industrial standard
- ID Code: 4.3 billion(32 bit)
- Hamming distance: = 4
- Transmitter Dimension & Weight:220 x 110 x 90 mm Apprx.860g(w/o batteries)
- Receiver Dimension & Weight:290 x 230 x 70 mm Apprx.2200g(w/o cable)
